Connecting Other Equipment
After making these connections, you wiii be abie to do the foiiowing:
• View the piayback of video tapes • Record TV programs • Record one TV program whiie viewing another program
Connecting a VCR, video disc player or Camcorder equipped with an S video output jack
: Signai flow
(Rear of projection TV)
to S video input
YC-15V/30V
(not suppiied)
to
S video
output
to VHF/UHF
to VHFAiHF output
»
S
^9
Preparing for use
Operating the equipment
1 Turn on the projection TV.
2 SetS-VtDEOt0’’OM"(p.48).
3 Press TVAfiDEO on the projection TV or on the Remote
Commander so that ‘ViOE01” appears on the screen.
To return to TV mode
Press TV/ViDEO or CHANNEL +/- on the projection TV,
or press TV/ViDEO, CH +/- or 0 - 9 and ENTER on the
Remote Commander so that a channei number appears
on the screen.
Note
You can watch both a TV and a VCR image at once, using
Picture-in-Picture (pp. 40 •• 43).
To operate the video equipment, refer to the instruction
manuai that comes with the equipment.
You can operate a Sony VCR or video disc player, or
a non-Sony VCR with the supplied Remote Commander.
For details, see "Using the Pre-Programmed Remote
Commander” (pp. 66 - 72).
About S video input
Video input and output signals can be separated into Y
(luminance or brightness) and C (chroma or color) signals.
Usually these two signîüs are combined in a VCR and sent
as one signal to a projection TV. Separation of the Y and C
signals prevents them from interfering with one another,
thereby improving picture (especially color) quality.
This projection TV is equipped with S video input jacks
through which these separated signals can be input directly.
Chapter 1: Setting Up
15
