Usingi the TV's Menu System
How to Use Your TV's Menu System
You use the buttons on the remote or the Front oF ymir TV to access the menu system and
make changes to the settings.
The Following pages explain how to tise the diFFerent types oF mentis to adjust the Features oF
vour TV.
TV MAIN MENU
1 Audio
; 2 Picture-'Atátitjf’,.', ''' K
, 3 Screen -t ' V ‘
' A Channel ' ,
Í 5 Tin» , ^ ‘ ’ 'Jr
Í 6 Paréntá'litcíritrole .
; 7 fiuIDE PtMS-f.Hemi , -j
V S Setup '
0 Exit : : ■
Tip
Feel free to explore the menu system. If you're
ever unsure where you are In the menu system,
or you're just plain tired of exploring, press
CLEAR to remove the menus from the screen
and start over again.
Menus
The First menu i.s called the Main menu. Press MENU on the remcrte or on the
Front panel to bring up tile Main menu. Note that holding MENTi For 2 seconds
displays the GUIDE Plu.s+ system.
Mentis take you to another menu or a control panel. There are two ways to
select a choice in a menu;
• Use your arrow buttons on your remote control to highlight yotir choice,
and press OK.
• Press a number button on the remote. For example, in the Main menu press
3 to go straight to the Screen menu.
Exiting a menu
There are three ways to exit a menu:
• Highlight Exit and press OK.
• Pre.ss 0 on the remote.
• Press CLEAR. The on-screen displays are cleared From the screen and you
return to TV viewing.
TV MAIN MENU
iLAuEo
_
_____
.....
2 Piet
AUDIO
™*!яУт iüiitp
.................................
5 Time
2 Tof>e Controls •
6 Pare
3 Audio Processor
7 5UID ;
4 Audio Output & Speakers
a Setu
0 Exit .
0 Exit ■
Audio Menu
Mute Press OK to reduce the TV’s volume to its minimum level. Press OK
again to restore the volume.
Tone Controls Displays the slider controls For adjusting tlie TV^'s treble, bass
and balance.
Audio Processor Displays a choice list oF available audio modes, which
control the way the .sound comes through your speakers. You can also access
the AUDIO PROCESSOR menu by pressing the SOUND button on the remote.
Mono Plays the sound in mono only. Use this setting \\ hen receiving
broadcasts with weak stereo signals.
Stereo Splits the incoming stereo audio signal into leFt and right channels.
Most TV programs and recorded materials have stereo audio. The \vord
STEREO appears on the lY'' when you tune to a program that is broadcast
in stereo.
4S
Chapter 4
