4.3 Demo mode – activate / deactivate
W 4840
Initial requirements
A Finish the current program.
A Open the door.
Accessing
x
Note
Access has to be completed within 10 seconds.
A Press and hold Start.
A Close the door.
A When the Start LED lights up steadily, after approx. 5 s, release the Start
pad.
A Press Start again quickly and hold, until after approx. 4 s, the Start LED
dims.
Acknowledgement indicator
The Start LED flashes slowly (1 Hz).
If access is not successful, the control automatically reverts to “select program”.
Options
Display: Follow the prompt in the display.
The demo program runs through automatically.
One demo program cycle lasts approx. 40 seconds.
x
Note
After a power interruption, the demo program starts again on its own.
A Program simulation / Interactive demo mode: In the demo mode, the
appliance can be operated, without a program being started.
Save and quit
A To deactivate the demo program, repeat the access procedure.
Descriptive Technical Documentation
DTD no. 11-4800 070-41
22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
