
A To select the program function: Press the left keypad below the display
(arrow pointing down)to select the program function and confirm by
pressing the right keypad (OK) below the display.
A To select the option: Press the left keypad below the display (arrow
pointing down)to select the option and confirm by pressing the right
keypad (OK) below the display.
The selected Option is marked by a V .
A To return to the programming menu: Press the option Back and confirm.
x
Warning!
For the appliance to function properly, specific options for the country it is
operating in have to be selected.
The service department software has to be adapted.
Program function Option
Reset refer to 070 2.3.23 Reset Reset all programming options to delivery status
Language selection refer to 070 2.3.6
Language
Select the language. USA: English
Water Plus increase in water level / extra
rinse cycle 070 2.3.1 Water Plus
Water +: Increase in water level in soak, pre-wash, main wash and in the rinse
cycles by selecting water plus, in the programs Cottons very hot, Minimum
iron, Silk, Mini, Automatic/Mixed load
Extra rinse cycle: Additional rinse cycle by pressing pad water plus, in the
programs Cottons very hot, Minimum iron, Silk, Mini, Automatic/Mixed load
USA: Water + and extra rinse. Increase in water level in soak, pre-wash, main
wash and in the rinse cycles by selecting water plus, in the programs Cottons
very hot, Minimum iron, Silk, Mini, Automatic/Mixed load, as well as additional
rinse cycle in programs Cottons very hot and Minimum iron
Permanent Gentle action refer to 070
2.3.2 Gentle cycle
off: not activated
on: activated
Suds cooling (reactivation) refer to 070
2.3.3 Suds cooling
off: not activated
on: activated
Temperature refer to 070 2.3.20
Temperature
°C
°F
Buzzer refer to 070 2.3.5 Buzzer
Fascia panel without buzzer pad: off
With buzzer: Volume represented in bars. Delivery status: 3 bars.
Keypad tone refer to 070 2.3.22 Keypad
tone
off
USA: on
Display Contrast refer to 070 2.3.7
Contrast
Set the display contrast: Contrast represented in bars. Delivery status: 5 bars
Display Brightness refer to 070 2.3.30
Brightness
Set the display brightness: Brightness represented in bars. Delivery status: 5
bars
Standby refer to 070 2.3.8 Standby
On: Display and back light are switched off after 10 minutes
not during a running program: Active only before and after a program, but
not during a running program
Memory (save last special setting) refer
to 070 2.3.4 Memory
off: Memory function not active
on: Memory function active
Drum light refer to 070 2.3.29 Drum light
Appliance without drum light: off
Appliance with drum light: on
Descriptive Technical Documentation
DTD no. 11-4800 070-35
22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.