Program function Option
Hygiene refer to 070 2.3.32 Hygiene
off
on
Chlorine bleach refer to 070 2.3.34
Chlorine / Bleach agent intake
off
on
Exit End programming mode
Table 2: Programming mode over view
Save and quit
x
Note
The indicated programming options are saved in the power electronic (ELP).
A Select program function Exit and confirm.
4.2 Programming Overview
W 4800
Initial requirements
A Install and connect the appliance correctly.
A End the current program as well as the demo mode.
A Open the door.
Accessing
x
Note
Access has to be completed within 10 seconds.
A Press Start and hold.
A Close the door.
A Release the Start pad, as soon as the Start LED flashes.
A Press Start 5 times and at the 5th time, hold until the Start LED flashes
rapidly (5 Hz).
Acknowledgement indicator
Start LED flashes rapidly (5 Hz).
If access is not successful, the control reverts automatically to “select program”.
Descriptive Technical Documentation
DTD no. 11-4800 070-37
22.12.2006, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
