23
• If the machine encounters a fault during
operation, the associated fault will be
displayed.
“ ” : Water pressure sensing error
“ ” : Problem of overfilling water
“ ” : Door is not closed
“ ” : Water inlet trouble
“ ” : Drainage trouble
“ ” : Unbalanced load
“ ” : Water temperature trouble
“ ” : Over load in motor
“ ” : Over load in motor
“ ” :
The washer experienced a power
failure.
“ ” : Dry heater or thermostat
trouble.
If these error letters are displayed, please
refer to the troubleshooting page28 and
follow the guide.
ow to use washer
H
Display
• When child lock is selected, the
“ ” is displayed.
• After the end of dry, “ ” is displayed.
• When time delay is selected, it shows
the remaining time to finish the selected
program.
• When washing cycle is completed,
“ ” is displayed.
• During washing cycle, the remaining
washing time is displayed.
• Recommended program by
manufacturer.
- Cotton (95˚C) :
around 2 hours and 27 minutes
- Cotton (60˚C) :
around 1 hour and 50 minutes
- Synthetic (40°C) :
around 1 hour and 23 minutes
- Delicate (30°C) : around 54 minutes
- Wool/Silk (30°C) : around 52 minutes
- Hand Wash (Cold) :
around 46 minutes
- Quick 30 (30°C) : around 30 minutes
- Rinse+ Spin : around 25 minutes
- Drain : around 1 minute
• The washing time may vary by the
amount of laundry, water pressure,
water temperature and other washing
conditions.
• If an unbalanced load is detected or if
the suds removing program operates,
the wash time may be extended.
(Max. increasing time is 45 minutes.)
1. Special function display
3. Completion of washing
4. Time left
2. Self diagnosis display
