20
ow to use washer
H
Child Lock
If you choose to lock
the buttons on the
control assembly to
prevent tampering this
function may be
selected.
• Child Lock can be set by pressing the
Rinse
+
button and Pre Wash button
simultaneously. (About three seconds)
• When child lock is set, all buttons are
inoperable except for power button.
•
To deactivate Child Lock system, press
Rinse
+
and Pre Wash buttons
simultaneously again. (About three seconds)
• To change to the desired program, whilst
in child lock mode.
1.
Press both Rinse
+
and Pre Wash together
once again. (About three seconds)
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
• The child lock can be set at any time and
it is automatically canceled when
operational errors occur.
Dry
• Do not overload above the
maximum drying capacity
indicator. Items must be able to
tumble freely.
• This washer-dryer’s automatic
process from washing to
drying can be selected easily.
• For most even drying , make
sure all articles in the clothes
load are similar in material and
thickness.
• If you open door and remove load before
dryer has finished its cycle, remember to
press the Start/Pause button.
• By pressing the Dry button, you can select
The maximum drying capacity for this
model is 4kg. When loading, please use
the maximum drying capacity indicator
behind the door as shown below.
• After the end of dry, “ ” is displayed.
By pressing the “Start/Pause” button the
program can be ended. If you not press
the “Start/Pause” button, the program is
ended after about 4 hours.
“ ” Cooling Cycle.
➔
➔
➔
Normal
Low Temp. Less
More
Time
