
VIEW Configuration Guide: Cisco WLAN Controllers (Virtual, Modules, and Standalone) with APs
1725-86192-000_AA.docx
August 2013 26
9 Click the Apply button to save the settings.
10 In the navigation pane under 802.11b/g/n, select Network.
11 Enable 802.11b/g Network Status and 802.11g Support if Spectralink Wireless
Telephones are configured for 802.11b & b/g mixed or g only mode in 8020/8030
handsets or 2.4 GHz in 84-Series handsets.
12 Click the Apply button to save the settings.
Configuring 802.11n
1 In the navigation pane under 802.11 b/g/n, select High Throughput (802.11n). Check
the radio box to enable 11n mode and allow all data rates to be supported.
2 Disable msdu aggregation:
a Connect to the CLI as described in the section “Configuring a New Controller Starting
from Factory Defaults”.