Cisco Markası'nın Ürünleri

VIEW Configuration Guide: Cisco WLAN Controllers (Virtual, Modules, and Standalone) with APs

1725-86192-000_AA.docx

August 2013 23

Screenshot for sample access point with three external antennas:

4 In the navigation pane under 802.11b/g/n, click Network. Set network parameters as

follows:

a Set 802.11b/g Network Status to Disable. The radio will be re-enabled after setting

radio parameters.

Admin Tip: Data Rates

For setting up the Data Rates, please consult your facility’s RF site survey, designed

for voice traffic, to determine if you have sufficient coverage to support all data rates.

Spectralink Wireless Telephones require the following minimum dBm reading to

support the corresponding

Mandatory

data rate setting in the access point.

802.11

Radio Standard

Minimum Available

Signal Strength (RSSI)

Maximum

"Mandatory" Data Rate

802.11b -75 dBm 1 Mb/s

-65 dBm 11 Mb/s

802.11g

-67 dBm

6 Mb/s

-47 dBm 54 Mb/s

802.11a -60 dBm 6 Mb/s

-45 dBm

54 Mb/s