AMT Datasouth Markası'nın Ürünleri

Appendix B — Service Level

Keypad Display Messages

Printer Calibration - Error Messages Description and Corrective Action

Off line: Calibration Err

Press RESET to Continue

This message indicates an error occurred

during the magnetic calibration

procedure.

This error can occur when:

• Coupon stock does not meet IATA

specifications.

• The coupon is loaded incorrectly.

• The coupon stock does not have a

magnetic stripe on the back of the

coupon.

• The magnetic stripe is damaged.

• There is an obstruction in the coupon

path.

• The magnetic read/write heads are

dirty.

• The coupon is not being transported

through the printer at the correct

speed.

• The magnetic read/write cables fail

or are not connected properly.

• A component fails on the Main

Controller PCB.

To correct this error:

1. Verify the coupon stock meets IATA

specifications.

2. Verify the coupon stock has a

magnetic stripe and is properly

loaded. (Staple tab must be loaded

first with magnetic stripe facing down

and towards the inside of the

machine.)

— continued