Problem Possible solution
The cycle is longer than
the time displayed.
• An unbalanced laundry load increases the duration time.
This is a normal behaviour of the appliance.
The washing results are
not satisfactory.
• Increase the detergent quantity or use a different deter-
gent.
• Use special products to remove the stubborn stains before
you wash the laundry.
• Make sure that you set the correct temperature.
• Decrease the laundry load.
You cannot set an op-
tion.
• Make sure that you press only the wanted button(s).
After the check, activate the appliance. The programme continues from the point of
interruption.
If the problem occurs again, contact the Authorised Service Centre.
If the appliance shows other alarm codes (the indicator of button flashes in red).
Deactivate and activate the appliance. If the problem continues, contact the Authorised
Service Centre.
14. TECHNICAL DATA
Dimension Width/ Height/ Depth/
Total depth
596 mm/ 854 mm/ 607 mm/ 643 mm
Electrical connection Voltage
Overall power
Fuse
Frequency
220-240 V
2000 W
10 A
50 Hz
Level of protection against ingress of solid particles
and moisture ensured by the protective cover, ex-
cept where the low voltage equipment has no pro-
tection against moisture
IPX4
Water supply pressure Minimum
Maximum
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Water supply
1)
Cold water
Maximum Load Cotton 7 kg
Energy Efficiency Class A+++
Spin Speed Maximum 1000 rpm
1)
Connect the water inlet hose to a water tap with a 3/4'' thread.
15. ELECTROLUX / AEG MAJOR APPLIANCES -
WARRANTY CONDITIONS
For domestic use only. Not for commercial or industrial use.
ENGLISH 23
