Programmes Load (kg) Energy con-
sumption
(kWh)
Water con-
sumption
(litre)
Approxi-
mate pro-
gramme du-
ration (mi-
nutes)
Remaining
moisture
(%)
1)
Standard 40°C cot-
ton
3.5 0.557 31 190 60
1)
At the end of spin phase.
2)
Not available for some models.
Left On Mode (W) Off Mode (W)
0.48 0.48
The information given in the chart above is compliant with the EU Commission regulation
1015/2010 implementing directive 2009/125/EC .
7. OPTIONS
7.1 Temp
Set this option to change the default
temperature.
Indicator = cold water.
7.2 Spin
With this option you can decrease the
default spin speed.
The related spin speed indicator comes
on.
Additional spin options:
No Spin
• Set this option to remove all spin
phases.
• Set it for very delicate fabrics.
• The rinse phase uses more water for
some washing programmes.
•
The related indicator
comes on.
Rinse Hold
• Set this option to prevent the laundry
creases.
• The washing programme stops with
the water in the drum. The drum turns
regularly to prevent the laundry
creases.
• The door stays locked. You must drain
the water to unlock the door.
• The rinse hold indicator comes
on.
To drain the water refer to
‘At the end of the
programme’.
7.3 Prewash
With this option you can add a prewash
phase to a washing programme.
Use this option for heavy soil.
When you set this option the programme
duration increases.
The related indicator comes on.
7.4 Extra Rinse
With this option you can add some rinses
to a washing programme.
Use this option for persons allergic to
detergents and in areas where the water
is soft.
The related phase indicator on the
control panel comes on.
7.5 Quick Wash
With this option you can decrease the
programme duration.
ENGLISH
11
