Run wash cycle
62
Starting the washing program
0 Check if the tap is open.
0 Start the washing program:
Press X/ (Start/Pause) button.
The washing program is started, or starts after the delay
time set has expired.
3
If the (Door) display is flashing red when the X/ (Start/Pause)
button is pushed, the door is not correctly closed. Firmly close the door
and press the X/ (Start/Pause) button again.
With the delay timer set:
The delay timer set expires, in the multi-display the remaining time
until the start of the program is displayed (each in full hours). During
this time, you can add washing or change or deactivate the delay timer.
• Adding washing: press the X/ (Start/Pause) button, this enables
the door to be opened. Then close the door and press the X/
(Start/Pause) button again.
• Changing or deactivating the delay timer: press the button (Delay
Timer) so often until the time desired is displayed; if the program
running time is displayed (such as 110 ) the washing program starts
without a delay.
Progress of the washing program
Before the start the selected program steps are dis-
played by the program progress display. During the
washing program the current program step is
shown.
The remaining wash time until the end of the pro-
gram is continuously displayed in minutes.
During a washing program the spin speed can still
be changed or o (Rinse Hold) can still be set. No
other settings can be changed.
With the X/ (Start/Pause) button, the washing program can be
interrupted at any time and continued by pressing the button again.
The washing program can also not be changed during the pause.
To stop the washing program prematurely turn the program selector
to (Off).
