Structure of the appliance
52
] (Delay Timer) button
With this button you can delay the start of a wash-
ing program by 1 to max. 19 hours.
With the q (Soaking) button pushed the washing
program starts immediately, the soak is extended by the time set, the
main wash follows automatically.
Displays
Display ?(Door)
This lamp indicates when the door can be opened if the
machine is on:
– green = door can be opened
– off = door can currently not be opened
– red = door is open
Multi-display
The multi-display
– shows the running time of the selected pro-
gram or the remaining wash time in minutes, at
the same time the display
lamp (Wash Time) lights up; or
– shows the delay time or the remaining time in hours
until the start of the washing program; or
– shows an error code (( and a number).
Program progress display
Before the start of the program, this shows the
program steps selected. During the washing pro-
gram, the display of the current washing program
step lights up.
k (Pre Wash)
l (Mainwash)
Á (Rinse)
o (Rinse Hold)
K (Spin)
(End)
Å (Overdosing) display
This shows that in the washing program which has
just run, too much washing powder was used and due
to this reason an extra rinse was carried out.
