Operating instructions
22
Starting the Washing Program
0 1. Check whether the water tap is open.
2. Start the washing program:
Press the (START/PAUSE) button.
The washing program is started, or starts at the
end of the time delay set.
3
If the (DOOR) indicator flashes red when the START/PAUSE button is
pressed, the door is not properly closed. Close the door firmly and press
the (START/PAUSE) button again.
If the delay timer has been set:
The start time delay set on the delay timer counts down; the time
remaining until the program starts is displayed on the multi-display (in
whole hours remaining). During this time you can add washing, change
or stop the delay timer.
• Adding washing: press the (START/PAUSE) button, the
door can be opened. Then close the door and press the
(START/PAUSE) button again.
• Changing or stopping delay timer: press the (DELAY
TIMER) button repeatedly until the desired time is displayed; when
the program duration is displayed (display in minutes, e.g.119), the
washing program starts without delay.
