Run wash cycle
23
During the washing program
You can at any time
– alter the setting of the final spin speed,
– Choose o (Rinse Hold),
– Change the temperature setting.
Other settings cannot be altered.
To stop the washing program early:
0 Press the M (On/Off) button.
0 Turn the program selector in a clockwise direction to 8 (Pump Out).
0 Press the M (On/Off) button again.
If washing cycle is completed/remove the washing
The washing program is finished when the M (On/Off) button
indicator lamp extinguishes.
After a Rinse Hold the water must be pumped out first or the washing
spun:
0 Either the press the Final Spin Speed/o (Rinse Hold) button as many
times as necessary until the indicator lamp for the desired spin speed
illuminates,
or
turn the program selector in a clockwise direction to 6 (Spin) (washing
is spun according to the program just completed),
or
turn the program selector in a clockwise direction to 8 (Pump Out)
(water is pumped out).
0 Open outer door and main door.
0 Remove the washing.
0 Switch the washing machine off by pressing the M (On/Off) button.
0 Close the water tap.
0 Pull out the detergent compartment a little bit, so that it can dry out.
Leave door slightly open so that the washing machine can ventilate.
