3. Set and start a programme for cotton
at the highest temperature without
laundry.
This removes all possible dirt from the
drum and the tub.
9.1 Language setting
The first time you activate the appliance,
the display shows the default language
and tells you to confirm it or change it:
1. Turn the programme knob to set the
desired language.
2. When the display shows the
necessary language touch Start/
Pauze - Départ/Pause button to
confirm the selection.
9.2 Change the language after
the first activation
1. Touch button T./min. and button
Vlekken - Taches/Voorwas -
Prélavage at the same time for some
seconds.
2. When the display shows the
language set, turn the programme
knob to set the new language.
3. Touch Start/Pauze - Départ/Pause
button to confirm the selection.
9.3 Clock setting
After you set the language, the display
tells to set the clock. The hour digits
flash.
1. Turn the programme knob to change
the hour.
2. Touch Start/Pauze - Départ/Pause
button to confirm the selection.
The minute digits flash.
3. Turn the programme knob to change
the minutes.
4. Touch Start/Pauze - Départ/Pause
button to confirm the selection.
9.4 Change the time of the
day after the first activation
1. Touch the button Extra Spoelen -
Rinçage+ and the button Tijd
Besparen - Gain de Temps at the
same time for some seconds.
The hour digits flash.
2. Turn the programme knob to change
the hour.
3. Touch Start/Pauze - Départ/Pause
button to confirm the selection.
The minute digits flash.
4. Turn the programme knob to change
the minutes.
5. Touch Start/Pauze - Départ/Pause
button to confirm the selection.
10. DAILY USE
WARNING!
Refer to Safety chapters.
10.1 Using weight sensors
For a correct operation of
the weight sensor, activate
the appliance and set the
programme BEFORE you
put the laundry in the drum.
10.2 Before activating the
appliance
1. Open the water tap.
2. Connect the mains plug to the mains
socket.
10.3 Activating the appliance
and setting a programme
1. Press button Auto Off to activate the
appliance.
2. Turn the programme knob to the
necessary programme or touch one
of the Geheugen / Mémoire buttons
to set a memorised programme.
The programme indicator comes on.
The indicator of Start/Pauze - Départ/
Pause button flashes with red colour.
www.aeg.com
18
