Dil ID: 6
Dil Adı: turkish
Dil Kodu: tr2tayfun AEG Markası'nın Ürünleri
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



Stains
Use this function for laundry with hard
stains to remove. When you set this
function, put the stain remover into
compartment .
The programme duration
increases. This function is
not available with a
temperature lower than
40° C.
7.9 T./min.
Touch button T./min. to:
Decrease the maximum speed of the
spin phase of the programme.
The display shows only
the spin speeds available
for the set programme.
Deactivate the spin phase ( 'No spin'
function).
Activate the Rinse Hold function.
Set this function to prevent fabric
creases. The appliance does not drain
the water when the programme is
completed.
7.10 Temp.°C
Touch this button to change the default
temperature.
Symbols
and = cold water
8. SETTINGS
8.1 Acoustic signals
You can hear the acoustic signals when:
You activate the appliance.
You deactivate the appliance.
You touch the buttons.
The programme is completed.
The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press Vlekken - Taches / Voorwas
- Prélavag and Extra Spoelen - Rinçage +
at the same time for 6 seconds.
If you deactivate the
acoustic signals, they
continue operate only when
you touch the buttons and
when a malfunction occurs.
8.2 Child Lock function
With this function you can prevent that
the children play with the control panel.
To activate/deactivate this function,
touch Temp.°C and T/min. buttons at
the same time until the indicator
comes on/goes off.
You can activate this function:
After you touch Start/Pauze - Départ/
Pause : all the buttons and the
programme knob are deactivated.
Before you touch Start/Pauze -
Départ/Pause : the appliance cannot
start.
8.3 Permanent Extra Rinse
With this function you can keep the extra
rinse permanently on when you set a new
programme.
To activate/deactivate this function
touch Tijd Besparen - Gain de Temps
and Startuitstel - Départ Différé at the
same time until the display show the
indicator comes on/goes off.
8.4 Weight sensor activating
or deactivating
To activate or deactivate the weight
sensors, press Temp.°C and Vlekken -
Taches / Voorwas - Prélavage at the
same time for some seconds.
9. BEFORE FIRST USE
1. Put 2 litre of water in the detergent
compartment for washing phase.
This activates the drain system.
2. Put a small quantity of detergent in
the compartment for washing phase.
ENGLISH 17