Electrical connection Voltage
Overall power
Fuse
Frequency
230 V
2200 W
10 A
50 Hz
Water supply pressure Minimum
Maximum
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Level of protection against ingress of solid particles
and moisture
IPX4
Water supply
1)
Cold water
Maximum Load Cotton 6 kg
Spin Speed Maximum 1000 rpm
1)
Connect the water inlet hose to a water tap with a 3/4'' thread.
14. INSTALLATION
14.1 Unpacking
All transit bolts and packing must be re-
moved before using the appliance.
You are advised to keep all transit devi-
ces so that they can be refitted if the ma-
chine ever has to be transported again.
1.
After removing all the packaging,
carefully lay machine on it’s back to
remove the polystyrene base from
the bottom.
2.
Remove the power supply cable and
the draining hose from the hose
holders on the rear of the appliance.
26
www.aeg.com
