Problem Possible cause/Solution
Spinning starts late or the machine
does not spin:
The electronic unbalance detection
device has cut in because the laundry
is not evenly distributed in the drum.
The laundry is redistributed by reverse
rotation of the drum. This may hap-
pen several times before the unbal-
ance disappears and normal spinning
can resume. If, after some minutes,
the laundry is still not evenly distrib-
uted in the drum, the machine will not
spin.
• Redistribute the laundry.
The machine makes an unusual
noise:
The machine is fitted with a type of
motor which makes an unusual noise
compared with other traditional mo-
tors. This new motor ensures a softer
start and more even distribution of
the laundry in the drum when spin-
ning, as well as increased stability of
the machine.
No water is visible in the drum:
Machines based on modern technolo-
gy operate very economically using
very little water without affecting per-
formance.
If you are unable to identify or solve the
problem, contact our service centre. Be-
fore telephoning, make a note of the
model, serial number and purchase date
of your machine: the Service Centre will
require this information.
13. TECHNICAL DATA
Dimensions Width / Height / Depth 60 / 85 / 63 mm
ENGLISH 25
