Acnodes Markası'nın Ürünleri

FPC 5105

Industrial Fanless Panel PC

are subject to change without noti ce. For l atest product information,

please visit Acnodes’ web site at www.acnodes.com.

14628 Central Ave,

Chino, CA 91710

tel:909.597.7588, fax:909.597.1939

Safety Precautions

Before getting started, please read the following important safety precautions.

1. The FPC5105 does not com e equipped with an operating s ystem . An operating

system m ust be loaded first before installing any software into the computer.

2. Be sure to ground yourself to prevent static charge when installing the internal

components. Use a grounding wrist strap and place all electronic components in any

static-shielded devices . Most electronic components are sensitive to static electrical

charge.

3. Disconnect the power cord from the FPC5105 before any installation. Be sure both the

system and external devices are turned OFF. A sudden surge of power could ruin

sensitive components that the FPC5105 must be properly grounded.

4. The brightness of the flat panel display will be getting weaker as a result of frequent

usage. However, the operating period varies depending on the application environment.

5. Turn OFF the system power before cleaning. Clean the s ystem using a cloth only. Do not

spray any liquid cleaner directly onto the screen. The FPC5105 comes with a

touchscreen. Although the touchscreen is chemical resistant, it is recommended that you

spray the liquid cleaner on a cloth first before wiping the screen. In case your system

comes without the touchscreen, you must follow the sam e procedure and not spray any

cleaner on the flat panel directly.

6. Avoid using sharp objects to operate the touchscreen. Scratches on the touchscreen

may cause malfunction or internal failure to the touchscreen.

7. The flat panel display is not susceptible to shock or vibration. When assembling the

FPC5105, mak e sure it is securely installed.

8. Do not open the system’s back cover. If opening the cover for maintenance is a m ust,

only a trained technician is allowed to do so. Integrated circuits on c omputer boards are

sensitive to static electricity. To avoid dam aging chips from electrostatic discharge,

observe the following precautions:

 Before handling a board or integrated circuit, touch an unpainted portion of the

system unit chassis for a few seconds. This will help to discharge any static

electricity on your body.

 When handling boards and components, wear a wrist-grounding strap, available

from most electronic component stores.