CUSTOMER RELEASE NOTES
12/2001 P/N: 9038023-12 Subject to Change Without Notice Page: 5 of 15
F0615-F
35 Industrial Way
PO Box 5005
Rochester, NH 03867-5005
(603) 332-9400
14. Console port fails to auto-negotiate properly. The VH-2402S only allows auto baud detection to take effect
after system restart. Once the user changes the terminal baud rate, after baud rate is detected; it will be not
known by switch agent.
15. After doing an upload configuration, the VH-2402S won’t allow a download configuration. The User has to
Re-start the Switch." Note: If the Switch is not "Re-Started", a "BootP" Event is attempted instead of a
"TFTP" Event during the "TFTP Download of the configuration."
16. To view a Filename longer than 20 Characters via Console, the user must first press <Ret> within the
Filename field then the Arrow Keys can be used to navigate.
17. On page 75 of the VH-2402S Management Guide , "Configuring VLANs", after Step 4, the user should go to
the "Port Assignment Configuration" and set each port to its VID. This will automatically add the ports to the
Egress List. Otherwise, if the user goes from Step 4 to Step 5, the user will only add ports to the Egress list
and then user will still have to go to "Port Assignment Configuration" to do the Ingress.
18. Do not perform a download configuration with a file size of 0. This will cause the VH-2402S not to boot.
Any other problems than those listed above should be reported to our Technical Support Staff.
GENERAL MANAGEMENT CONSOLE MENU INFORMATION:
Internal MAC errors, which appear on the Port Statistics Screen, are for statistical purposes only. This screen
shows items other than Runts, Giants, CRC errors etc.
