Produkty značky True Manufacturing Company

............ www.truemfg.com ............

True Food International Equipment, Inc.

INSTALLATION / OPERATION INSTRUCTIONS

INSTALLATION OF LEGS AND CASTORS

Securing Castors

Toobtainmaximumstrengthandstabilityofthe

unit,itisimportantthatyoumakesureeachcastor

issecure.Thebearingraceonthecastorofthetop

edgeofthelegmustmakefirmcontactwiththerail.

Unit Leveling

Four leveling shims have been provided for leveling castored

units positioned on uneven floors. Shims must be positioned

between rail end and bearing race. TRUE recommends a four

shim limit to any single castor.

A. Turnthebearingracecounter-clockwiseuntil

thecabinetislevel.Levelfronttobackandside

toside.(diagonally)

B. Installthedesirednumberofshims,making

suretheslotoftheshimisincontactwiththe

threadedstemofthecastor.

C. Ifmorethanoneshimisused,turntheslotata

90°anglesotheyarenotinline.

D. Turnthebearingraceclockwisetotightenand

securethecastorbytighteningtheanchoring

boltwitha3/4inchopen-endwrench,socket,

orthetoolprovided.

CAUTIO N

To avoid damage to lower rail assembly, slowly raise unit to

upright position after installing castors.

Thread four screws into castor in the

underside of cabinet frame rail.

Anchor the four screws rmly to the

base of the unit.

1 2