MASTER
CONTROL
9
i
I
SCHEMATIC
CHANGES
FOR
MODIFICATION
FIGURE
4
OVERALL
DIMENSIONS
FIGURE
5
OPTIONAL ACCESSORIES
A68S Stacking Kit
The
A68S Kit enables you to conveniently stack
together the
M62V with the M63, M67 or M68 Series
Mixers. An interconnecting cable is provided for con-
necting the AUX. OUTPUT of the
M62V to the M68
Series Mixers or an M63 Audio Master. Additional units
can be stacked with the use of additional
A68S Kits.
The Stacking Kit includes two brackets and an inter-
connecting cable.
A68SC Interconnecting Cable
Cable only, as supplied in the
A68S Stacking Kit,
for use in connecting the AUX OUTPUT of the
M62V
to an M68 Series Mixer (AUX INPUT) or M63 Audio
Controller. The
A68SC is a 305 mm (12 in.) long single
conductor shielded cable with a phono plug on each
end.
A68C OUTPUT CABLE KIT
The
A68C Output Cable Kit provides a convenient
and flexible method of connecting the microphone
level output of the
M62V, M63, M67 or M68 Series
Mixers to the great variety of amplifier and input re-
ceptacle configurations. Enables you to connect to
virtually any PA system. Kit includes:
One 4.6 m (15 ft) two-conductor shielded cable
with professional three-pin male and female
audio connectors.?
One 305 mm (12 in.) two-conductor shielded
adapter cable with professional three-pin female
audio connector on one end and Hubbel twist
lock plug on other end.
One 305 mm (12 in.) single conductor shielded
adapter cable with professional three-pin female
audio connector on one end and
Amphenol type
MCI connector on the other end.
One Phone Plug adapter for use with MC1 Con-
nector.
A68C
OUTPUT
CABLE
KIT
t
Designed to mate with Cannon
XL
series, Switchcraft
A3
(Q.G.)
series or equivalent connector.
A68L LOCKING PANEL
The
A68L Panel fastens over the controls of the
M62V, M63, M67 or M68 Series Mixers, locks in place
with a padlock (supplied), and prevents tampering with
controls once they have been set. The
A68L Kit con-
tains locking panel, small padlock and two keys.
A68L
LOCKING
PANEL
A68R RACK PANEL KIT
Designed to mount
M62V Audio Level Controller
in
standard 19" rack.
Installation and Mounting
1.
Assemble brackets to panel using hardware
supplied.
2. Remove two cover mounting screws from bottom
of
M62V.
3. Slide M62V into brackets and re-assemble screws
through brackets into bottom of mixer.
NOTE: The
A68L Locking Panel may be used
simultaneously with the
A68R Rack Panel
Kit.
A68R
RACK PANEL
KI1
AC60
ATTACH^
CARRYING CASE
The AC60 is a vinyl-covered attache type carrying
case (compartmentalized and foam lined), with space
for any of the
M62V, M63, M67 or M68 Series Mixers
and as many as four microphones, cables, adapters,
and other accessories.
Page
5
