
5-3.2 Removal Procedure
DO NOT disassemble or open the Li-ion battery to avoid severe personal injury or death by
electrical shock.
1. Discharge the high voltage battery. Refer to 3-1 Discharging Procedures.
2. Raise the vehicle and remove the Li-ion battery under covers (front, center and rear).
3. Remove the harness clamp (A) and disconnect the high
voltage harness connector (B) from the Li-ion battery.
Touching high voltage components without wearing
appropriate Personal Protective Equipment (PPE) will
cause electrocution.
a. Use the following instructions to disconnect the
high voltage harness connector.
To prevent electrocution, cover battery side of high
voltage connector with insulated tape (A).
: Insulated tape
A
B
AAYIA0165ZZ
AAYIA0049GB
AAYIA0166ZZ
39