Produkty značky Liebherr

Switching the appliance on and off

Youarerecommendedtocleantheappliancebeforeswitchingitonforthersttime

(see "Cleaning"). Connect the appliance to the mains - the appliance is switched on.

• To switch the appliance off: Keep the "ON / OFF" button pressed for 3 sec.

so that the temperature display goes out.

• To switch the appliance on: Press the "ON / OFF" button until the Display

lights up.

Setting the temperature

To reduce the temperature: PresstheDOWNbutton;

To increase the temperature: Press the UP button.

- While you are entering the temperature, the set tempera-

ture will ﬂash on the display.

-Youcanchangethesettingsinincrementsof1°Cbriey

pressing the button again.

- The electronic controls will switch over automatically about 5 seconds after the last

time you pressed the button, and the actual temperature will be displayed.

If F1 appears in the display, the appliance has a fault. Consult your nearest customer

service point.

Fan switch

The interior fan ensures a constant and even interior temperature and a suitable

climate for wine storage. When activating the Ventilation button, the humidity in the

appliance is further increased, which has a particularly positive effect for long-term

storage. The increased level of humidity prevents the corks from drying out.

To switch on:

Hold down the Alarm button and then press the

Light button. The LED will come on.

To switch off:

Hold down the Alarm button and then press the

Light button. The LED goes dark.