• The passenger’s side pin will have an “R”
marked on it and will look like this:
3. Pull the pin handle up to disengage from the
retaining clip, then pull the pin out.
4. Repeat this procedure for the pin on the other
seat base.
5. Pull the seat rearward about two inches (5 cm) and
then lift the seat from the floor rails.
6. Remove the seat from the vehicle.
7. For the first row rear
seat, stow the safety
belt latch by attaching
the clip on the
safety belt latch to the
trim just inside the
side door. For
the remaining rear
seats, stow the safety
belt latch plate on
the clip at the
window trim.
1-7
