Rear Seats
Rear Seat Operation
Removing the Rear Seat
1. Disconnect the quick
release latch plates for
the lap shoulder
belts on the bench seat
to be removed. To
do this, press the tip of
a key into the release
hole of the safety
belt buckle while
pulling up on the
safety belt.
2. Locate the pins.
• There are two pins located on the inboard sides
of the rear seats. If the vehicle has floor mats,
the pins will be located under a flap that has
been cut into the mat. The driver’s side pin will
have an “L” marked on it and will look like this:
1-6
