CHECK
OWNER S MANUAL
,
OBD2 CODE READER
16
"
"
--A flashing Rig ht Arrow Indicating additional information is
available on the next screen.
"
"
--A flashing Left Arrow Indicating additional information is available
on the previous screen.
1) Select "3. I/M"”from the main menu by pressing the
ENTER
button.
"NO"
--At least one monitor supported on the vehicle has not completed
its diagnostic testing, and (or) the Check Engine ( MIL) lig ht is on.
"READY"
--indicates that a particular monitor being checked has
completed its diagnostic testing;
"Not RDY(NOT READY)"
--indicates a particular monitor being checked
has not completed its diagnostic testing;
"N/A"
--The monitor is not supported on that vehicle.
Menu:
3. I/M
If the Scan Tool is not connected yet, then refer to
"
Reading Codes"
from 1 to 6. at Paragraph 4.1.
2) Use the
SCROLL
button to view the status of the
MIL
lig ht (
"ON"
or
"OFF"
) and the following monitors:
MISFIRE"
--Misfire monitor
FUEL
--Fuel System Monitor
CCM
--Comprehensive Components Monitor
EGR
--EGR System Monitor
O2S
--O2 Sensors Monitor
AT
--Catalyst Monitor
EVAP
--Evaporative System Monitor
HO2S
--O2 Sensor Heater Monitor
2AIR
-- Secondary Air Monitor
HCM
--Heated Catalyst Monitor
A/C
--A/C system Monitor
3) Press the
ENTER
button to return to the main Menu.
