SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 724 DIAL NUMBERING PLAN
DESCRIPTION:
Provide the access codes and dialing plan needed for operation of features and programs. The
system comes with a wide range of acceptable numbering plans set as default and the option to
customize the dialing plan. There is also an error message provided because of the chance of
duplicating an access/feature code. Dialing codes are entered via the dial pad key, by pressing
the dial pad number the required steps to select the feature. For example, for OHVA, the number
6 would be pressed three times. If Block Code is required, press 2 for the first letter B and then
use the UP or DOWN key to make the selection from BARGE to BLOCK.
NOTE: Please remember that this program is system-wide.
DIAL KEY PAD
COUNT###
1 2 3
DIAL 2 AAPLAY BARGE CAMP
DIAL 3 DECT DECT FAUTO
DIAL 4 GPIK HLDPK IOG
DIAL 5 LCR LCR LCR
DIAL 6 MMPA NEW OHVA
DIAL 7 PAGE REJECT S0
DIAL 8 TG UA
DIAL 9 WCOS WCOS WCOS
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF
Display shows
DIAL NUMBER PLAN
ACCT :47 →
2. Using the chart, press dial pad key
number to make selection
DIAL NUMBER PLAN
DECT01 :7901→_
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to advance cursor
3. Enter in digits via the dial key pad (01-48)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to advance cursor
DIAL NUMBER PLAN
DECT01:7901→
4. Enter in digits via the dial key pad DIAL NUMBER PLAN
DECT01:7901→8000
