SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
3. Enter key number (e.g., 18)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key move cursor
SYS.KEY PROGRAM
18:DS ®
4. Using above chart pressing dial pad key
number to make selection
OR
Press UP or Down key to make selection and press
RIGHT soft key to advance cursor to step 5 to enter
extender if required
OR
Press LEFT soft key to return to step 3
SYS.KEY PROGRAM
18:DS ®GPIK
5. If required, enter extender (e.g.,03)
OR
Press UP or DOWN key to make selection
Press RIGHT soft key to return to step 2
Press LEFT soft key to return to step 3
SYS.KEY PROGRAM
18:DS ®GPIK03
6. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: SEE BELOW
24 Button Keyset with or without Display
01:CALL1 02:CALL2 03:NONE 04:NONE 05:NONE 06:TG9
07:NONE 08:NONE 09:NONE 10:NONE 11:NONE 12:NONE
13:NONE 14:NONE 15lNONE 16:NONE 17:NONE 18:NONE
19:CONF 20:MUTE 21:GPICK 22:PAGE 23:CBK 24:MSG
12 Button Keyset
01:CALL1 02:CALL2 03:NONE 04:NONE 05:NONE 06:TG9
07:NONE 08:NONE 09:NONE 10:NONE 11:NONE 12:NONE
Add-On Module
01:DS 02:DS 03:DS 04:DS
05:DS 06:DS 07:DS 08:DS
09:DS 10:DS 11:DS 12:DS
13:DS 14:DS 15:DS 16:DS
17:DS 18:DS 19:DS 20:DS
21:DS 22:DS 23:DS 24:DS
25:DS 26:DS 27:DS 28:DS
29:DS 30:DS 31:DS 32:DS
33:DS 34:DS 35:DS 36:DS
37:DS 38:DS 39:DS 40:DS
41:DS 42:DS 43:DS 44:DS
45:DS 46:DS 47:DS 48:DS
