Clear-Com FreeSpeak 11
INTEGRA INTEGRATED WIRELESS TECHNICAL SPECIFICATIONS
SYSTEM (CELL CONTROLLER CARD, ACTIVE ANTENNA
& ANTENNA SPLITTER)
Frequency Spectrum 1.88GHz – 1.93GHz* DECT
Cellular auto-roaming
technology
Size Cell Controller Card (in
Matrix): Standard 6RU
Eurocard (HxWxD)
Active Antenna:
6.18 x 5.04 x 1.61in
(157 x 128 x 41mm)
Antenna Splitter:
6.18 x 5.04 x 1.61in
(157 x 128 x 41mm)
Maximum Beltpacks per
Cell Controller
40
Maximum Cell Controller
Cards per Matrix
4
Maximum Antenna per
Cell Controller Card
10
Connection between Cell
Controller Card & Active
Antenna
2 x RJ45 (CAT-5 screened
cable) up to 4,800ft
(1,500m) from matrix
Environmental -67°F to +158°F
(-55°C to +70°C)
BELTPACK
Audio Bandwidth 100Hz - 7.1KHz (G.722)
No. of Pages 6
Number of Duplex
Routes per Beltpack
Up to 12 with individual
level control (6 pairs)
Mode of Operation Full-duplex on all routes
No. of Full-Duplex
Audio Paths
Up to 6 with individual
level control (3 pairs)
Level/Talk Controls 2 top-mounted push-to-
talk rotary encoders
“Page”/Menu Scroll
Buttons
2
Enter/Answer-Back
Button
1
Frequency Spectrum 1.88GHz – 1.93GHz* DECT
Cellular auto-roaming
technology
RF Output 200mW Burst,
17mW average**
Range Up to 800ft (50 – 150m
typical) in good radio
frequency conditions
Battery 4 AA Alkaline cells,
Rechargeable:
4 AA Ni-MH cells
Battery Charging In unit, via external power
supply connected
to beltpack
Battery Life 8 - 10 hours with
4 x Ni-MH – also accepts
4 x Alkaline AA cells
Headset Connector 4-pin male,
Clear-Com standard
Microphone Type Electret and Dynamic,
selectable in
beltpack menu
Microphone Level
and Headset Limiter
Selectable in
beltpack menu
Headset Limiter Selectable from
beltpack menu
Environmental -67°F to +158°F
(-55°C to +70°C)
Dimensions Tapered design at largest
points approx. 1.5 x 3.5 x
5.75in (38 x 87 x
144mm) (dwh)
Weight 8.8oz (0.25kg) excluding
batteries
12.4oz (0.35kg) including
batteries
ACTIVE ANTENNA
Beltpacks Supported
per Active Antenna
5
Active Antenna
Transmission Range
Up to 800ft (50 – 150m
typical) to beltpack
Active Antenna Output 200mW Burst,
80mW average**
Maximum Distance,
Base to Antenna via
Transceiver Port
3,200ft (1,000m)
on 4-pair CAT-5 or
better cable
Local Powering 24VDC power supply
Connection to
FreeSpeak Base
RJ-45
Antenna Connector Type Reverse Polarity SMA, two;
supplied omnidirectional
whip antennas
Mounting Via integral tabs with holes
for screws
Dimensions 1.5 x 5.0 x 6.1in (38 x 125
x 153mm) (HxWxD)
Weight 14oz (0.4kg)
ACTIVE SPLITTER
No. of Antennas 5
No. of Splitters per Base 2
Connection Between
Base and Splitter
CAT-5 or better cable
with RJ-45
Connection Between
Splitter and Antennas
CAT-5 or better cable
with RJ-45
Powering of Splitter Locally powered
via supplied external
power supply
Weight 16oz (0.45kg)
TRANSMISSION METHOD
Method of RF Operation Uses two slots per
beltpack for wider
frequency response
Modulation QPSK
Frequencies of Operation 1.88GHz – 1.93GHz*
(restricted by software)
RF Output 250mW burst, average as
new FCC level 2 – 4mW
*Exact frequency range depends upon country.
Japan: 1.893GHz - 1.906GHz
**Japan: 8mW average
