N8417pr-0920
16
ASSEMBLY
F
26
• Insert and "snap" the steering wheel cap into the center of the
steering wheel.
Steering Wheel Cap
25
• While pressing down on the steering wheel, grasp the steering
column under the dash and pull it up as far as it will go.
• Insert the
5
/32" x 1
1
/2
"
pin through the hole in the
steering column.
• Grasp the steering column again and pull down to fit the pin
into the center of the steering wheel.
Press Wheel
Lift Steering
Column
Press Wheel
27
Steering
Column Cap
• Fit the steering column cap
onto the end of the
steering column.
• Insert a #8 x
3
/
4
"
screw through the large opening in the
steering column cap and into the hole in the steering column.
Tighten the screw.
• Turn the vehicle upright.
28
• Insert and "snap" the key assembly into the slot in the dash.
Key
Assembly
