19
N8417pr-0920
ASSEMBLY
F
35
• Fit the wing tabs into the slots in the top edge near the rear of
the vehicle.
Hints:
• There is a left and right wing. They are designed to be
assembled one way.
• Make sure the tabs on the top of the taillights fit into the
bottom of each wing.
Wings
Taillight Tabs
36
• Insert two #8 x
3
/4
"
screws into each wing. Tighten the screws.
37
• Position the truck bed over the back end of the vehicle.
Truck Bed
38
• Insert three #8 x
3
/4
"
screws into the top of the truck bed.
Tighten the screws.
