We will only be using half of the ISO power cable, we will cut off the iso connectors just
before the fuses. And the control pad will have to be cut, and extension wires spliced in. This
is because it is not long enough to reach from the trunk to where I have it mounted. If you
mount the brain box under the dash, you will not have to do this.
SECTION 1, TRUNK LINER REMOVAL
First you have to remove the eight cargo net tie down screws. Four per side
Then remove the spare cover, and the black plastic trim from the lower trunk opening. Just
pull up on it, and it will snap off.
Fold the rear seat backs forward. Slide the trunk liners (highlighted below) bottom first
towards the center of the car. Go as far as you can, then pull the top down. Keep doing this
until it is free.
