SECTION 8
APPLIANCES & INTERIOR FEATURES
8-18
(close) the powered dome. The FAN switch con-
trols the single speed exhaust fan.
POWER ROOF VENT - Galley Area or Bath
The power roof vent in the galley and bath
ceilings has a 3-speed turbine fan and a power
dome. The vent is controlled by a thermostat on
the galley wall, which will automatically raise
the dome and turn the fan on when the tempera-
ture reaches the setting you have chosen. When
the air around the thermostat has cooled to
below the setting, the dome will automatically
lower and the fan will shut off.
The thermostat control can be placed in the
OFF position to cancel power to the power dome
and vent fan.
The fan shroud on the ceiling has a fan power
switch that lets you turn the fan off if you want
just the vent dome raised with no fan running.
The fan speed switch allows you to adjust the
amount of circulation you need at any time.
SLIDER WINDOWS
Swing the latch handle straight out from the
window. Grasp the sliding window edge frame
and slide the window to the side. Be sure the latch
is open before trying to slide the window closed.
Vertical slider windows have spring-loaded
catches on both sides of the window that pop out
to hold the window in its fully raised position.
Press the catches outward toward the frames
while lowering the window.
Power Ventilator
Thermostat - Galley
Power Ventilator
Thermostat - Bath
Fan Speed
Switch
Fan Blade
Switch
On/Off
