SinoV-A10-A User Manual
www.sinovoip.com.cn
16
No Sound or
distorted sound
Adjust the volume
Check if the cable connect to TV and media plafyer well.
Check that the speakers are connected correctly
No audio or digital
output
check if the cable connected well
Check if your amplifier is set correctly .
Re-connect power adapter.
Check if the output mode for TV and media box keep the same.
The remote control
does not work
Aim the remote control directly at the sensor at
Reduce the distance to the box.
Replace the batteries in the remote control.
Player does not
respond to some
operating commands
during display
Operations may not be per
mitted. Refer to the User manual.
Possibility of system halted, re-insert with Power adaptor to restart.
No sound during
movies display
The Audio codec may not be supported by the box. You can change to the
supported audio on pla
Check the volume.
Check if the cable connected well.
Check if the output mode for TV and media box keep the same.
The contents of the
USB flash
drive&SD/MMC card
cannot be read
The USB flash drive format is not compatible with the box.
If one of the USB cannot read, please turn off the box and restart it
No sound with HDMI
connectin
Check if TV output mode is the same with media box.
Check your TV systerm setup.
Check the volume.
The TV screen is
blank and the palyer
LED is blinking
Turn off your palyer, wait 30 seconds, turn it on again, if under HDMI status,
Check if HDMI connection is correct or change another HDMI cable
Set the output solution of this box into 720P.
