SinoV-A10-A User Manual
www.sinovoip.com.cn
15
2. Then Use the SD card connect to your PC.
3. Please select the file you want to upgrade in the interface, and then run.
4. Runs successfully, the SD card to connect to the player, and then plug in the power.
Then the LED will remain flashing, this process takes 3-5 minutes, the lights went out on to a successful
upgrade. And then restart.
Troubleshooting
Warning
Under no circumstances should you try to repair the box by yourself, as this is will invalidate the warranty.
Do not open the box as there is a risk of electric shock. If a fault occurs, first check with points listed below
before taking the box for repair. If you are unable to remedy a problem by following hints, consult your
dealer for help.
problem solution
no power
Check if the power adapter is properly connected .
Check if the power adapter damaged or not.
No picture
Re-connect with HDMI cable or AV cable.
Re-connect power adapter;
Check if the output mode for TV and media box keep the same.
Check if the TV is switched on.
