2. HOW TO USE THIS MANUAL
When you have done a repair, substitution, adjustment, etc..., consult this manual to apply correct operation code
and repair time given; see examples 1, 2 or 3.
When filling in the application form, bear the following in mind:
- Make sure you note down basic operation code, the description and repair time given to each of the operations.
- Reasonably choose the complementary operations which intervene in the reparation, substitution, etc., done.
- When using the "OTHER" code (00), note down "real time"; this will correspond to invested time on repair,
substitution, etc. done. In the "Break down description" space of the form, specify real service done.
Model code: AL01 (mechanical injection)
Basic operation: CONNECTING ROD CRANKPINS DIAMETER MEASURE (FOUR)
Complementary Operations: D / M CONNECTING ROD AND PISTON ASSEMBLY (SET)
Additional time: ADDITIONAL TIME WITH AIR CONDITIONER
ADDITIONAL TIME MECHANICAL INJECTION ENGINE
Step 1. Look for CRANKSHAFT in the SECTION CODES AND ASSEMBLY INDEX, or look for CRANKSHAFT in
the ILLUSTRATIONS INDEX.
Step 2. Open page 6A-06, look for connecting rod crankpin number and the operation that has been done.
Step 3. Look for complementary operations.
Step 4. Look for additional time because of C/V (code variation)
Basic
operation:
CONNECTING ROD CRANKPINS DIAMETER
MEASURE (FOUR)
Complementary
operation:
D/M CONNECTING ROD AND PISTON
ASSEMBLY (SET)
Additional time:
ADDITIONAL TIME WITH AIR CONDITIONER
Operation code: 6A0618 6A0710 A B
Operation time: 0.3 + 11.7 + 0.2 + 0.1 = 12.3
6A0618
+
+
6A0710
+
0.3
+
11.7
-5-
Example 1: (When doing a service which contains complementary operation and additional time because of C/V)
ADDITIONAL TIME MECHANICAL INJECTION ENGINE
+
A
B
+
0.1
0.2
