P-2602HWUDL-D Quick Start Guide
4
If the PHONE light is on, skip to Section 6 to see how to make calls through the Internet.
If the INTERNET light comes on but the PHONE light is off, go to Section 4.3 and use the
VOICE OVER INTERNET SETUP wizard.
If the INTERNET light is off but the DSL light is on, go to Section 4 and use the INTERNET/
WIRELESS SETUP to configure your Internet access settings.
V Check your connections if an LED does not turn on. Then turn the P-
2602HWUDL-D off, wait for a few seconds and turn it back on. See
Troubleshooting. If the problem remains, contact your local vendor.
3 DECT Phone Registration
In order to use your DECT phone with the P-2602HWUDL-D, the DECT phone must
register with the P-2602HWUDL-D’s DECT base station. Take the following steps to
register your DECT phone with the P-2602HWUDL-D.
1 Press down the DECT base station button ( ) on the left side (when facing the LEDs
(lights)) of your P-2602HWUDL-D for 6 to 11 seconds. When the DECT light begins to
blink, the P-2602HWUDL-D is in registration mode. The P-2602HWUDL-D in
registration mode for 25 to 30 seconds. Your DECT phone must be registered within the
time period.
" If you press the DECT base station button for 12 seconds or more, the
DECT base station resets and all previously registered DECT phones must
be re-registered.
