P-2602HWUDL-D Quick Start Guide
3
" When the ZyXEL Device does not have power, the phone(s) connected to
the PHONE port can still be used for making PSTN calls.
3 PHONE: Use a telephone cable (and any telephone adaptor provided with your P-
2602HWUDL-D) to connect your telephone to this port.
4 USB 2.0: Connect a USB (version 2.0 or lower) memory stick for file sharing. The P-
2602HWUDL-D automatically detects the USB device.
5USB 2.0: Use a USB cable (not provided) to connect a USB (version 2.0 or lower)
printer to this port.
6 ETHERNET 1-4: Use an Ethernet cable to connect a computer to this port for initial
configuration and/or Internet access.
7 Use the power adaptor provided with your P-2602HWUDL-D to connect an appropriate
power source to this socket.
8 Push the power switch to the on position.
Look at the LEDs (lights) on the top panel of the P-2602HWUDL-D.
•The POWER light blinks during start-up and is green once the P-2602HWUDL-D is ready.
• Each ETHERNET light turns on if the corresponding ETHERNET port is properly con-
nected. The lights blink when the P-2602HWUDL-D is sending or receiving data through
the corresponding ETHERNET port.
•The DSL light stays on if a physical connection with your DSL modem exists and blinks
when transmitting data. The INTERNET light stays on when Internet access is available.
•The PHONE lights stay on when your SIP account is registered and they blink if the
receiver is off the hook.
•The WLAN light turns on when the wireless LAN is ready. It blinks when the P-
2602HWUDL-D is sending/receiving data through the wireless LAN.
•The USB light turns on when there is a USB device (printer or memory stick) connected to
the P-2602HWUDL-D.
