2. Turn the programme knob until the pro-
gramme marker is aligned with a programme
on the control panel. Make sure that the ap-
pliance is in setting mode, refer to ’SET-
TING AND STARTING A PROGRAMME’.
• If the salt indicator is on, fill the salt con-
tainer.
• If the rinse aid indicator is on, fill the rinse
aid dispenser.
3. Load the baskets.
4. Add the detergent.
• If you use the combi detergent tablets,
activate the Multitab option
5. Set and start the correct programme for the
type of load and the degree of soil.
Using the detergent
1
2
A
3
Put the detergent or
the tablet in compart-
ment (A).
A
B
If the programme has
a prewash phase, put
a small quantity of de-
tergent in compart-
ment (B).
4
Setting and starting a programme
Setting mode
The appliance must be in setting mode to:
•
Start a programme.
• Set the level of the water softener.
• Activate the rinse aid dispenser when the
Multitab function is on.
Turn the programme knob until the programme
marker is aligned with a programme on the con-
trol panel:
• If the programme duration flashes in the dis-
play, the appliance is in setting mode.
• If the programme duration in the display is not
flashing, the appliance is not in setting mode.
To put the appliance in setting mode, press and
hold Start until the programme duration flashes
in the display and the phase indicators for the
programme come on.
Starting a programme without delay start
1. Open the water tap.
2. Close the appliance door.
3. Turn the programme knob until the pro-
gramme marker is aligned with the pro-
gramme you want to set. Make sure that the
appliance is in setting mode.
• The programme duration flashes in the
display.
• The phase indicators of the set pro-
gramme come on.
4. Press Start. The programme starts.
21
www.zanussi.com
