Programme
1)
Degree of soil
Type of load
Programme
phases
Duration
(min)
Energy
(kWh)
Water
(l)
5)
Fresh soil
Crockery and cut-
lery
Wash 65 °C
Rinse
30 0.8 8
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the programme duration and the consumption values.
2) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the
temperature and quantity of the water, the energy consumption and the programme duration.
3) This is the standard programme for test institutes. With this programme you have the most efficient use of
water and energy consumption for crockery and cutlery with normal soil.
4) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and
bad odours to come out from the appliance.
Do not use detergent with this programme.
5) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
Information for test institutes
For all the necessary information for test performance. send an email to:
Write down the product number (PNC) that is on the rating plate.
Options
Multitab option
Activate this option only when you use the com-
bi detergent tablets.
This option deactivates the flow of rinse aid and
salt. The related indicators are off.
The programme duration can increase.
Activating the Multitab function
Activate or deactivate the Multitab function
before the start of a programme. You can-
not activate or deactivate this function while a
programme operates.
1. Turn the programme knob until the pro-
gramme marker is aligned with a programme
on the control panel. Make sure that the ap-
pliance is in setting mode, refer to ‘SET-
TING AND STARTING A PROGRAMME'.
2. Press Multitab, the Multitab indicator
comes on.
If you stop to use the combi detergent
tablets, before you start to use separately
detergent, rinse aid and dishwasher salt,
do these steps:
1. Set the water softener to the highest level.
2. Make sure that the salt container and the
rinse aid dispenser are full.
3. Start the shortest programme with a rinsing
phase, without detergent and without
dishes.
4. Adjust the water softener to the water hard-
ness in your area.
5. Adjust the released quantity of rinse aid.
Before first use
1. Make sure that the set level of the water
softener agrees with the water hardness in
your area. If not, adjust the water softener.
Contact your local water authority to know
the water hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
18
www.zanussi.com
