W150M+150Mbps Wireless AP
16
More details please refer to 5-3.
3.4 WISP Mode
In this mode, you do not need to configure the signal transmitter
but only to simply configure the W150M+ to amplify the wireless
signal and multi computers can share the internet. The device
supports DHCP function to assign IP addresses automatically and
NAT function. If you enable the WISP outside the house but the
inside WISP AP signal is poor, the device can enhance the signal
and improve the speed. If more than one wired computer access,
you can connect the LAN port of the device to the switch and the
switch to the computer.
The network topology is as follows.
