W150M+150Mbps Wireless AP
13
Chapter 3 Working Modes Introduction
This device has five working modes. You can change the modes
depending on the applications. This chapter will introduce every
mode in details. The default mode is AP (access point) mode.
3.1 AP mode
In this default mode, the device worked as a converter between the
wired and wireless signal is in default settings. If you already have
a wired router in use, you can choose wireless AP mode. Connect
LAN port of the device to the router in use with an Ethernet cable
(refer to 5-1 for detail setup). Then many wireless clients
(generally the wireless network adapter) can access at the same
time. For example, in a big hotel, connect the Router to the
broadband access port with the Ethernet cable and you can share
the internet with others. Of course, your wireless network adapter
must have the same SSID, Channel with the Router. If the Router
enables Wi-Fi protection, the wireless network adapter also must
have the same security mode and key to access the router.
Common network connection topology is as follows.
