Wireless AC1200 ADSL2+ Dual Band Modem Router
11
Enter the Internet info (IP address, subnet mask, gateway and DNS server address)
provided by your ISP.
Enter the username and password provided by your ISP.
When Bridge mode is enabled, the router works as a modem. If you wish to initiate
a dialup directly from your PC for Internet access or enjoy the entire Internet
connection by yourself (instead of sharing it with others), you can select Bridge.
Note
After saving the Ethernet mode settings, you will see a note prompt to tell you the connection status Disconnected and
asks you to insert the Ethernet cable to 1/WAN port.
And then you need to connect the Ethernet cable from the Internet side provided by your ISP to the 1/WAN port, i.e. to
finish there in Ethernet Mode in Chapter 2 Hardware Install-> 2.2 Install the Device.
For your network security, please finish this part of settings. (Recommended)
Quick Wireless Setup:
① Set wireless SSID
② Set the wireless password.
③ Click OK to apply all the configurations on this page (including Primary Setup)
