Wireless AC1200 ADSL2+ Dual Band Modem Router
10
DNS server. This information should have been provided to you by your ISP. If a
secondary DNS server address is available, enter it also.
Enter the assigned IP address, subnet mask, and the IP address of your ISP’s primary
DNS server. This information should have been provided to you by your ISP. If a
secondary DNS server address is available, enter it also.
When Bridge mode is enabled, the router works as a modem. If you wish to initiate
a dialup directly from your PC for Internet access or enjoy the entire Internet
connection by yourself (instead of sharing it with others), you can select Bridge.
Note
If your country and/or your ISP are not covered on the home page, select Other and configure the VPI and VCI value
manually. If you do not know this information, ask your ISP to provide it. Also you can refer to Appendix 4 VPI/VCI
List.
2.2 Ethernet Mode
Connection Mode: Select ETH mode.
Connection Type: Select your Connection Type, and fill the relevant Internet information. If you are not clear about
this info, contact and consult your ISP.
