Wireless AC1200 ADSL2+ Dual Band Modem Router
142
Enable Wireless: check/uncheck to enable/disable the wireless network of 5GHz.
Hide Access Point: This option allows you to have your wireless network names (SSID) publicly broadcast or if you
choose to enable it, the SSID will be hidden.
SSID: Service Set Identifier. This is the name of your wireless network.
Country: Select your country from the drop-down list.
Channel: Select a channel or select Auto to let system automatically select one for your wireless network to operate on
if you are unsure. The best selection is a channel that is the least used by neighboring networks. The default selection is
Auto.
Bandwidth: Select the bandwidth from the drop-down list. There are three selections provided, 20MHz, 40MHz and
80MHz. The default is 80MHz.
Apply/Save: Click it to apply your current configurations.
3.2.2 Security
Click Wireless > 5G > Security to enter the page where you can configure the security settings of wireless network of
5GHz.
Note
1. To use the WPS security, the wireless client must be also WPS-capable.
2. When both STA PIN and Authorized MAC are empty, PBC is used. If Hide Access Point is enabled or Mac filter list is
empty with "allow" chosen, WPS2 will be disabled.
3. WPS only supports WPA2, which means only when you select “WPA2” encryption or “Open”, you can change WPS
status.
