Wireless AC1200 ADSL2+ Dual Band Modem Router
144
WPS (hardware button): Press the hardware WPS button on the device for 1 second and the WPS LED will keep
blinking for about 2 minutes. Within the 2 minutes, press the WPS button on your wireless computer or other device.
When the WPS displays a solid light, the device has joined your wireless network.
Device PIN: To use this option, you must know the PIN code from the wireless client and enter it in the corresponding
field on your device while using the same PIN code on client side for such connection.
Enable WPS: Check/uncheck to enable/disable the WPS function. It is disabled by default.
Manual Setup AP
You can manually set the network authentication method:
Select data encryption;
Specify whether a network key is required to authenticate to this wireless network;
Specify the encryption strength;
Click Apply/Save when done.
Network Authentication: Select Open, Shared, 802.1X, WPA-PSK, WPA2-PSK or Mixed WPA/ WPA2-PSK from the
drop-down list to encrypt your wireless network.
Depending on the type of network authentication you select, you will be prompted to enter corresponding settings.
WEP Encryption: Select Enabled or Disabled.
Encryption Strength: Select 128-bit or 64-bit.
Current Network Key: Select a network key to be active.
Network Key 1/2/3/4: Enter 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys; enter 5 ASCII
characters or 10 hexadecimal digits for 64-bit encryption keys.
