C
HAPTER
5
| WAN Configuration
Channel Configuration
– 62 –
◆ Protocol — Displays the protocol used for transmission of data
packets.
◆ ATM VCC — Displays the virtual channel connection (VCC) to the
remote ATM switch formed by the combination of the VCI and VPI.
◆ Status — Allows the user to enable or disable the link.
◆ Use DHCP — Allows the user to disable fixed IP address and use DHCP.
◆ Local IP Address — Specifies a local IP address.
◆ Remote IP Address — Specifies a remote IP address on the ATM
server.
◆ Subnet Mask — Specifies a subnet mask.
◆ Default Route — Enables/disables a default route.
◆ Bridge — Allows the user to select the connection protocol, such as
PPPoE, or disable it.
◆ MTU — Sets the maximum transmission unit (MTU), the size of the
largest packet that a network protocol can transmit.
◆ Apply Changes — Applies the user specified changes.
◆ Return — Returns to the previous creen without making changes.
◆ Undo — Undoes any changes to the connection made by the user and
restores the originals.
ACTIONS - DELETE
Selecting the trashcan icon will open a window asking you to confirm if you
want to delete the configured connection. Click “OK” to delete the
connection, or “Cancel” to return to the previous screen.
Figure 27: Confirm Delete
